Fast Australia-Wide Shipping | Expert Trailer Parts Advice | Australian Owned & Operated

DEEMAXX Trailer Disc Brakes: Choosing Replacement Rotors, Calipers & Pads

Replacing DEEMAXX trailer disc-brake components starts with identifying the system already fitted. A rotor’s diameter, a familiar wheel stud pattern or an axle-capacity label is only part of the picture.

This guide explains how to compare replacement rotors, hydraulic calipers and pads, with examples from our DEEMAXX range. It is a parts-selection guide, not an installation, hydraulic-pressure selection or brake-conversion procedure.

Quick answer: which details should I check?

Record the existing rotor, caliper and mounting-bracket part numbers. Establish whether the rotor slips over a separate hub or is integral with the hub. Then compare the rotor dimensions, wheel pattern, bracket arrangement, caliper family and pad reference. Integral hub-and-rotor replacements also require bearing, seal and spindle checks.

If the markings are unclear, have a qualified trailer repairer identify and measure the assembly before ordering. Similar-looking parts are not necessarily interchangeable.

Slip-over rotor or integral hub and rotor?

DEEMAXX offers both configurations. They need different checks before you choose a replacement.

Design What you are comparing Example from our range
Slip-over rotor A separate rotor used with a compatible hub. Check the hub interface, centre bore, wheel drilling, rotor offset, thickness and matching bracket. RTR-120-MAXX 12-inch rotor
Integral hub and rotor A combined hub-and-rotor component. Check spindle and bearing fit, seal, cap, wheel drilling and the matching caliper/bracket arrangement. RTR/HUB-102-MAXX hub and rotor

These are examples of different designs, not interchangeable alternatives. Do not order a slip-over rotor to replace an integral assembly without having the complete proposed system checked.

Choosing a replacement DEEMAXX rotor

Start with the exact part reference and its drawing. Compare these details with the existing assembly:

  • Slip-over or integral construction.
  • Nominal diameter and specified rotor thickness.
  • Rotor offset and position relative to the mounting bracket.
  • Centre bore and hub interface.
  • Wheel stud count, pitch circle diameter and stud clearance.
  • Caliper, bracket and wheel clearance.

For integral assemblies, record both inner and outer bearing cone and cup numbers, the seal arrangement and cap fit. A five-stud Ford wheel pattern does not establish that the hub uses an Australian Ford Slimline bearing profile.

If you need help recording bearing details, use our trailer wheel-bearing identification guide. Do not choose the bearing kit from the wheel pattern alone.

Match the caliper family, not just the brand

DEEMAXX separates its replacement calipers into families including 3–6K, 7–8K and 10–12K. These are manufacturer range designations, not proof that every caliper fits every rotor associated with that capacity.

Our CALP-3-6K-SS stainless caliper and CALP-3-6K-MAXX coated caliper are examples from the 3–6K family. Compare the full part number with the existing caliper and approved assembly.

Confirm the rotor thickness, bracket and slide arrangement, hydraulic connection and installation clearance. A compatibility statement for one Kodiak model or DEEMAXX family should not be extended to every product from either brand.

Have a repairer confirm actuator suitability and hydraulic requirements for the complete system. This guide does not assign one operating pressure or actuator model to the entire DEEMAXX range.

Stainless steel versus MAXX-coated components

DEEMAXX offers stainless steel and MAXX-coated options. Read the full component description: a stainless caliper, a coated caliper supplied with stainless-backed pads, and a stainless rotor are separate specifications.

For example, the manufacturer lists CALP-3-6K-SS as a stainless steel caliper, while CALP-3-6K-MAXX-SS is a MAXX-coated caliper supplied with stainless steel pads. Those similar-looking suffixes do not describe the same caliper-body material.

Choose after checking the exact construction, fitment, expected exposure and maintenance requirements. No finish should be treated as a promise that the complete brake system is corrosion-proof or maintenance-free.

Choosing replacement brake pads

Identify the caliper first. Rotor diameter alone does not identify the pad shape or the caliper family.

Our range includes a DEEMAXX ceramic pad set listed for 3–6K calipers and a stainless-backed ceramic pad set for the matching family. Compare the existing pad reference and shape with the required replacement.

“Stainless” in a pad description should not be read as a solid stainless friction surface. Check the friction material and backing-plate specification separately.

The listings above describe sets of four pads for two calipers. Confirm the supplied quantity before ordering, particularly when comparing an individual caliper with a separately boxed pad set. A capacity designation is not a pack-quantity statement.

Do I need a different mounting bracket?

The bracket positions the caliper relative to the rotor. Its part number matters just as much as the caliper number.

DEEMAXX’s published DBI-3.5K-MAXX integral set pairs the RTR/HUB-102-MAXX rotor/hub with a CALP-3-6K-MAXX caliper and DBB-3.5KI-MAXX bracket. That is a specific manufacturer-listed combination, not a rule that any 3–6K caliper and bracket will work together.

For a replacement bracket, compare the axle-flange mounting, rotor design and offset, and the manufacturer’s specified component combination. Do not assume the existing bracket remains suitable when changing between slip-over and integral designs.

American-style trailer brakes: check the actual specification

DEEMAXX catalogues commonly use pound-based axle designations and imperial part dimensions. Keep those distinctions when identifying a replacement; do not round a capacity or dimension and treat the result as a fitment specification.

Likewise, an American-style hub and an Australian bearing-profile version may share a wheel pattern without sharing spindle fitment. Match the exact part and drawing rather than relying on where the trailer was built or which vehicle’s wheels it uses.

This guide does not make a country-of-manufacture claim for every DEEMAXX component.

Before-ordering checklist

  • Rotor, caliper and mounting-bracket references.
  • Slip-over or integral hub-and-rotor design.
  • Rotor diameter, thickness, offset and centre-bore details.
  • Stud pattern and relevant wheel clearance.
  • Caliper family, pad shape and replacement reference.
  • For integral hubs: inner and outer bearings, seal, cap and spindle fit.
  • Exact finish and supplied quantity.
  • Repairer’s confirmation of the complete component combination.

Have brake inspection, component replacement, bleeding and testing carried out by a suitably qualified technician using the instructions for the exact system. Replacing a visible worn component is not a substitute for assessing the cause of a braking fault.

Frequently asked questions

Can I choose DEEMAXX pads by rotor size?

No. Start with the caliper family and specified pad reference. Similar rotor diameters can be used in different assemblies.

Does a new caliper include the mounting bracket?

Do not assume so. Check the individual listing. A complete conversion kit and a replacement caliper have different contents.

Can I replace only the rotor on a slip-over system?

A separate rotor is a distinct component, but a repairer must assess the hub, caliper, pads and mounting arrangement before confirming the repair. A matching diameter alone is not enough.

Does a higher-capacity caliper upgrade the trailer rating?

No capacity upgrade should be inferred from changing one component. The complete brake, axle and trailer specifications still apply.

Find the DEEMAXX parts for your trailer

Compare our stainless caliper, coated caliper, stainless-backed pad set and 12-inch slip-over rotor against your existing component references.

Not sure which version you have? Send R&M Trailer Spares clear photos of the rotor, caliper and bracket, readable part numbers and your repairer’s measurements. We can help narrow the selection before you order.

Technical references: DEEMAXX replacement caliper families, CALP-3-6K-SS, CALP-3-6K-MAXX-SS, stainless pad-set reference and integral assembly component list.

Leave a comment