Fast Australia-Wide Shipping | Expert Trailer Parts Advice | Australian Owned & Operated

Manuals & Parts Diagrams

Find official manufacturer manuals and parts references for identifying, operating and servicing trailer components. Start with the exact model and part number on your equipment, then check the document’s application and revision before using it.

This library links to manufacturer-hosted documents. It is separate from our trailer parts buying guides, which help you compare products and prepare the details needed before ordering.

Jump to: Electric Brake Manuals · AL-KO iQ7 · Brake Parts Diagrams · Coupling Manuals · Suspension & Chassis · Related Buying Guides · Replacement Parts

AL-KO Electric Brake Manuals

Electric Brake User Manual

Operation, inspection and servicing information for the electric brake systems covered by this manual. Confirm the assembly identification and applicable instructions before use.

Open AL-KO Electric Brake User Manual (PDF)

AL-KO iQ7 Instructions & Supporting Documents

iQ7 Actuator & Control Installation and Operating Instructions

The linked 2024-labelled edition specifies use with motion-sensing brake controllers. Confirm that it applies to your actuator and controller combination; do not assume it covers every iQ7 installation.

Open AL-KO iQ7 Actuator & Control Instructions (PDF)

iQ7 In-Car Kit Manual & Hydraulic Bleeding Guide

AL-KO’s literature library lists the separate in-car kit manual and hydraulic-system bleeding guide under its AL-KO iQ7 heading. Select the document that matches your equipment.

Find iQ7 Supporting Documents in AL-KO’s Literature Library

AL-KO Electric Brake Parts Diagrams

10-inch Electric Brake Service Parts

Component diagrams and service-part references, including standard and off-road magnet options. Match the exact assembly, part reference and handedness before ordering.

Open AL-KO 10-inch Electric Brake Service Parts (PDF)

12-inch Electric Brake Service Parts

Service-part references and illustrations for the covered 12-inch electric brake assemblies. Confirm the model and diagram before selecting a component.

Open AL-KO 12-inch Electric Brake Service Parts (PDF)

Coupling Manuals

AL-KO Off-Road Ball Coupling: 619350 Fixed & 619200 Override

This June 2024 user manual identifies the 619350 fixed and 619200 override models. Check the part number on your coupling and follow the instructions for the correct model. It is not the manual for an off-road pin coupling.

Open AL-KO Off-Road Ball Coupling User Manual (June 2024 PDF)

For buying and identification help, see our trailer coupling buying guide. Comparing a replacement? View the AL-KO 619350 fixed off-road ball coupling and confirm the model, mounting and braking arrangement before ordering.

Suspension & Chassis References

AL-KO Chassis Handbook: Existing Chassis & G&S Identification Reference

The handbook linked below is hosted in AL-KO’s February 2023 document directory. Use only the sections applicable to your identified chassis and fitted suspension. A G&S chassis name alone does not identify the suspension or establish which replacement shock absorber fits.

Open AL-KO Chassis Handbook (2023-hosted PDF)

For replacement-part identification, see our G&S Control Rider shock-absorber buying guide. Confirm the suspension model, original shock reference, mounting and required dimensions with your repairer or manufacturer. Do not assume shocks are interchangeable because of colour or a similar appearance.

If your chassis or suspension differs from the systems covered, obtain the instructions for the exact model from the manufacturer. This handbook is not a universal manual for every Control Rider or AL-KO suspension system.

Related Buying Guides

Use our buying guides to collect identification details before comparing replacement parts. They complement, rather than replace, the manufacturer’s instructions above.

Browse AL-KO Replacement Brake Parts

These links are starting points for comparing products, not confirmation that a part suits your trailer. Match the existing assembly, full part reference, mounting and handedness. Brake diameter alone does not establish compatibility, and standard and off-road magnets should not be assumed interchangeable.

10-inch Electric Brake Parts

12-inch Electric Brake Parts

Choosing the Right Document

  • Record the manufacturer, model and full part number, including suffixes.
  • Check the document’s scope, revision and any controller or assembly restrictions.
  • Do not apply instructions for a similar-looking component without confirming suitability.
  • Use diagrams to support identification, not as a substitute for complete installation instructions.

For safety-critical installation, servicing, adjustment and testing, use a suitably qualified technician and the instructions applicable to the exact system. If a document is unclear or a manufacturer link has changed, contact us or the manufacturer before proceeding.

Need Help Identifying a Component?

Send R&M Trailer Spares clear photos of the component and its markings, together with the trailer, axle or suspension identification where available. We can help narrow down the relevant part or reference before you order.