Trailer Parts Buying Guides & Technical Help
Not sure which trailer part you need? Start with our buying guides and identification checklists for brakes, bearings, suspension, couplings and jockey wheels. For help matching a replacement, send R&M Trailer Spares the existing part number and clear photos.
Choose a topic: AL-KO guides · Brakes · Bearings & wheels · Suspension · Couplings & jockey wheels
AL-KO Buying Guides
Compare replacement components and check the information needed before ordering.
- AL-KO iQ7 buyer’s guide — start here when researching the iQ7 hydraulic brake actuator.
- Identify your AL-KO brake drum — markings, brake size, wheel pattern and bearing checks.
- Choose an AL-KO brake backing plate — size, handedness, mounting and standard versus off-road options.
- Choose an AL-KO brake magnet — compare standard and off-road references, side-specific parts and kits.
- AL-KO Parallel versus 2 Tonne bearing kits — bearing combinations, seals, caps and pack quantities.
- AL-KO jockey-wheel replacement guide — compare mounting, height and winding access.
- Choose an AL-KO corner steady — open and closed lengths, mounting checks and Big Foot options.
Trailer Brakes & Hydraulic Systems
- Trailer brake types explained — an introduction to electric, hydraulic and mechanical systems.
- Electric-over-hydraulic trailer brake guide — understand the system before comparing components.
- DEEMAXX rotor, caliper and pad buying guide — identify the assembly and replacement-part family.
- AL-KO brake-drum identification — collect the details needed to compare a replacement.
- AL-KO backing-plate selection — compare complete electric brake assemblies.
- AL-KO brake-magnet selection — distinguish magnet-only parts from replacement kits.
Bearings, Wheels & Hubs
- Identify your trailer wheel bearings — record inner and outer cone, cup and seal details.
- How to measure wheel PCD — identify the wheel stud pattern.
- Compare AL-KO Parallel and 2 Tonne bearing kits — use identified bearing details to compare two specific kits.
Suspension & Chassis Identification
- G&S Control Rider shock-absorber replacement guide — identify the suspension and existing shock reference before ordering.
- Beam axle triangulation guide — technical reference for discussion with your trailer repairer.
Couplings, Jockey Wheels & Parked Stability
- Choose the right trailer coupling — start with your trailer’s coupling requirements.
- General jockey-wheel buying guide — compare common configurations.
- AL-KO jockey-wheel replacement guide — narrow down an AL-KO replacement using mounting and clearance details.
- AL-KO corner-steady buying guide — compare reach and mounting for stationary stabilisation, not lifting.
Trailer Maintenance Planning
Boat-trailer maintenance checklist — a starting point for planning inspection and servicing alongside your manufacturer’s instructions.
Still Unsure Which Part You Need?
Send our parts team clear photos of the existing component, every readable part number, the trailer or suspension identification and any measurements your repairer has confirmed. Label inner and outer bearings, or left- and right-hand components, separately where relevant.
Capacity, colour or a similar appearance alone does not establish compatibility. These guides support identification and buying decisions; they do not replace the manufacturer’s instructions or a qualified technician’s assessment of safety-critical parts.